Select Page





The Ribe Insert wood fire not only looks classy, modern and chic, it is also great for the environment as it is one of the cleanest insert fires available in Australia. Emissions are a very minimal 0.4 g per kg of wood burned, well below Australian limits. The Ribe has a single air control lever air which allows for the fire to heat up very quickly and warm your house soon after it has been lit. The Ribe Insert can heat an area of between 120 and 170 m2. Your space will stay warm and toasty even after the fire has been shut down as ember retention is high at more than 6 hours. The other great feature of this heater is its versatility. You can have it fitted into an existing fireplace or installed in a built-in designer fireplace. This makes it suitable for both traditional and contemporary homes and will look stunning in either.

  • Popular modern Insert
  • One handle operates primary and secondary air
  • Full Glass Door
  • Compact dimensions, great performance
  • Suitable for installation into existing open fireplaces or as a build in designer fireplace
  • Tested to AUS / NZ Standard 4012, 4013:1999

Technical Info

Dimensions (mm) h 835 w 610 d 390
Weight 75 kg
Output Range 4-12 kW
Heating capacity 170 sqm to 120 sqm
Efficiency AUS / EU 73% / 82%
Wood Consumption at medium burn rate 1.8 kg / hr
Finish Steel
Colours Black
Flue Size / Outlet / Length 145 mm / Top / 4.05 m
External Air Supply Yes
Log Size Approximately 33 cm
Clearance – Back / Side / Corner Type Not Applicable
Heat Bank (Ceramics or Stone) No
Heat Bank (Refractory Concrete) No
Warranty 2 Years Manufacturers